Hot Runner Coil heater

 Topright Brand Hot runner heater is mainly used for hot runner mold , as well as other precision heating system.  Spring heating ring external using high quality Ni-Cr steel tube, the internal use of high purity magnesium oxide , high temperature resistance wire.The wire is after the annealed, with flexibility can be bent into an arc or circle heating.Rapid heating and cooling occur, due to the low mass construction Its high working temperature, fast heating, uniform heating precision, long service life, can be automatically controlled area, high thermal conduction, while internal heating material damage, external can reuse.

 

Topright Hot Runner Coil Heater Feature:
1. Heating cross-section as follows:
Round(DIA) 3mm,3.3mm,3.5mm
Square 3X3mm,3.3X3.3mm,3.5X3.5mm,4x4mm
Rectangular  2X4mm,4.2X2.4mm,1.3X2.3mm,4.2X2.2mm

2.Heating coil ID 8mm ~ 50mm, heating ring height: 40mm ~ 200mm
3. voltage: 24V ~ 380V,wattages: 200W ~ 3000W(6.5W/CM2 )
4.Built-in thermocouple : with or without J /K thermocouple(Available)
5.Leads:Teflon wire lead with s.steel braided /fiberglass sheath/ kevlar sleeve)
6. Max. Temperature: 650℃

 

Topright Hot Runner Coil Heater Application:
Blow Molding;
Plastic Die Applications;
Extrusion;
Hot Runner Systems;
Injection Molding;
Thermo forming;
Hot Runner Nozzles & Bushings

Topright Hot Runner Coil Heater Photo:

Hot Runner Coil heater Coil Heater 第1张

Hot Runner Coil heater Coil Heater 第2张

Hot Runner Coil heater Coil Heater 第3张

Hot Runner Coil heater Coil Heater 第4张

Hot Runner Coil heater Coil Heater 第5张

Hot Runner Coil heater Coil Heater 第6张


 

Online customer service
Online customer service system